User Manual

E-3
and/or recording or playback is impaired. This
may occur even though radio broadcasts are au-
dible.
Notes:
● Replace all old batteries with new ones at
the same time.
● Do not mix old and new batteries.
● Remove the batteries if they are weak or if
the unit will not be used for long periods of
time. This will prevent potential damage due
to battery leakage.
● Batteries are not included.
Caution:
Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
1 Disconnect the AC power lead, and re-
move the battery compartment cover.
2 Insert 4 “D” size batteries (UM/SUM-1,
R20, HP-2 or similar) into the battery
compartment.
● Insert the batteries according to the direc-
tion indicated on the rear panel.
● When inserting or removing the batter-
ies, push them toward the ë battery ter-
minals.
● Installing the batteries incorrectly may
cause the unit to malfunction.
3 Replace the battery compartment cover.
Battery replacement:
Replace the batteries when they become weak
Operation with Batteries
1 Set the FUNCTION switch to RADIO.
2 Set the BAND SELECTOR switch to FM,
MW, SW1 or SW2.
3 Turn the TUNING control to tune in to the
desired station. The FINE TUNING con-
trol functions only for SW1 and SW2
bands.
4 Turn the VOLUME control to increase or
decrease the volume.
After use:
Set the FUNCTION switch to STAND-BY.
Aerial adjustment:
FM
MW
Listening to the Radio
SW1 and SW2
2
3
4
1
STAND-BY
To remove the
batteries:
QT-222W(B) 92L20101550040
QT-222W(B)_E.pm 03.10.24, 11:55 AM10