User Manual

41
Basic adjustment settings
MENU
Power Control
No signal off [Enable]
Disable
Enable
MENU
Power Control
No operation off [Enable]
Disable
Enable
Power control
Power Control setting allows you to reduce the display brightness to save energy.
No signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
1 Press MENU.
2 Press a/b to select “Power Control”, and then
press ENTER.
3 Press a/b to select “No signal off”, and then press
ENTER.
4 Press a/b to select “Enable”, and then press
ENTER.
5 Press MENU to exit the menu.
• Five minutes before the power shuts down, hazard
warning displays every minute.
A
•“Disable” is factory preset value.
• Return to the previous menu by pressing RETURN.
• When a TV programme finishes, and the AVC System
receives signal input, this function may not operate.
No operation off
When set to “Enable”, the power will automatically shut
down if the signal stays inactive for 3 hours.
1 Press MENU.
2 Press a/b to select “Power Control”, and then
press ENTER.
3 Press a/b to select “No operation off”, and then
press ENTER.
4 Press a/b to select “Enable”, and then press
ENTER.
5 Press MENU to exit the menu.
• Five minutes before the power shuts down, hazard
warning displays every minute.
A
•“Disable” is factory preset value.
• Return to the previous menu by pressing RETURN.
ENTER
MENU
/
MENU
Power Control
Energy Save [Save]
Standard
Save
Power control for AV source
Energy save
When set to “Save”, power consumption is reduced
by decreasing picture brightness.
1 Press MENU.
2 Press a/b to select “Power Control”, and then
press ENTER.
3 Press a/b to select “Energy Save”, and then press
ENTER.
4 Press a/b to select “Save”, and then press
ENTER.
5 Press MENU to exit the menu.
A
•“Standard” is factory preset value.
• Return to the previous menu by pressing RETURN.