User Manual

34
Programme Setup “Manual”
01
02
Lock
OffSAT.1
PRO7
03 KABEL
On
Programme Setup “Manual”
01
02
Decoder
Off
INPUT2
INPUT3
SAT.1
PRO7
03 KABEL
INPUT1
Basic adjustment settings
Setting the child lock
You can block the viewing of any channel.
On Programme Setup “Manual” menu
1 Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2 Press a/b to select “Lock”, and then press
ENTER.
• Child lock menu displays.
3 Press a/b to set “Lock” to “On”, and then press
ENTER.
A
• Even when this function is switched “On”, it will not work if
a password has not been set. See page 58 for details on
password setting.
• When “Lock” is set to “On” for a channel, “CHILD LOCK
HAS BEEN ACTIVATED.” displays , and the image and
sound of the channel is blocked.
• When pressing ENTER while “CHILD LOCK HAS BEEN
ACTIVATED.” displays, password input menu will display.
Inputting the correct password lifts the child lock
temporarily until the power is turned off.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.
Decoder menu
Lock menu
ENTER
MENU
///
Setting the decoder
When connecting a decoder to the unit, you need
assign the terminal input.
On Programme Setup “Manual” menu
1 Press a/b/c/d to select the channel you want to
edit, and then press ENTER.
• The selected channel information displays.
2 Press a/b to select “Decoder”, and then press
ENTER.
• Terminal inputs information displays.
3 Press a/b to select an INPUT terminal, and then
press ENTER.
A
•“Off” is factory preset value.
• Return to the previous menu by pressing RETURN.
• Exit the menu by pressing MENU.