User Manual

9
Preparation
Fixing the speakers
1 Position the speaker brackets (upper and lower
parts) to the speaker, by firmly fastening the O
headed screws with a O screwdriver.
Speaker terminals are located on the lower part
of the speaker.
The opening between the speaker parts and
Plasma Display TV (Panel Unit) can be filled with
the spacer. Attach the spacer to the speaker before
positioning the speaker brackets.
2 Loosely fasten the P headed screw to the
upper part of the Plasma Display TV (Panel
Unit) with the hexagon wrench. Hook the
speaker on the screw.
3 Loosely fasten the P headed screw to the lower
part of the Plasma Display TV (Panel Unit) with
the hexagon wrench.
4 Adjust the position so there is no unnecessary
opening between the speaker and the Plasma
Display TV (Panel Unit). Fasten firmly the screws
which loosely fastened in step 2 and 3 above.
Secure the other speaker by the same steps.
L
Do not apply force to the front grill net, nor put your fingers
into it.
Using fittings other than the ones supplied, may cause
reduction in performance or malfunction of the speakers.
Use the supplied fittings to fix the speakers to the unit.
Do not carry or move the display by holding the speakers.
Hold the bottom of the display when carrying.
A
For details on the speaker cable connection and the cable
routing, see pages 11 and 12.
Speaker bracket (upper part)
O headed screw
O headed screw
Speaker terminal
Spacer
Speaker bracket
(lower part)
a
Fixing the right speaker
Grill net
Spacer
A
Attach the spacer to the speaker along the grill
net.
P headed screw
P headed screw
Fasten the P headed
screws with the hexagon
wrench.