Operation Manual

5
Getting Started
Using the PW-E430 for the first time
BesuretoperformthefollowingoperationsbeforeusingthePW-E430forthersttime.
1. Set the battery replacement switch on the bottom
oftheunittothe‘REPLACEBATTERY’position.
2. Remove the battery cover.
3. Inserttheonebattery.Makesurethebattery
polarity is correct.
4. Replace the battery cover.
5. Setthebatteryreplacementswitchtothe‘NORMAL
OPERATION’position.
6. Open the unit and press
ON/OFF
to turn the
power on.
TheLCDcontrastscreenwillappear.
• Shouldadifferentscreenappear,followthe
reset procedure on page 40.
• Ifthepowercannotbeturnedon:
• Makesurethebatteryreplacementswitchisplacedatthe‘NORMAL
OPERATION’position,thenpress
ON/OFF
again.
• Ifthepowerstillcannotbeswitchedon,tryfollowingsteps1through6inthe
above procedure again.
7. AdjusttheLCDcontrastbyusing
,
and press
ENTER
.
Thekeysoundon/offscreenwillappear.
8. Select
J
or
N
toturnthekeysoundon/off.
The main menu screen will appear.
• TheLCDcontrastandthekeysoundsettings
canbeadjustedlaterintheSet-upmenu
(Menü-Einstellungen).
Turning the power on/off
The power can be switched on by pressing the keys listed below.
To turn off the power, press
ON/OFF
.
Key Display status upon start-up
ON/OFF
Restores the display as it was before the unit was switched off (Resume
function).
MENU
The main menu screen appears.
EN-DE
Thedisplayofeachdictionaryand/orfunctionappears(Direct-on
function).
INFOS
TheContents-Infoscreenappears(Direct-onfunction).