Operation Manual

ManualsBrandsSharp ManualsTranslatorPW-E410

Using the Converter function

The Converter function consists of two converters: the Currency converter, and the

Metric converter.

Currency converter (Währungsumrechner)

Setting a currency rate

One conversion rate can be set.

Set the following rate: C

1 = US$ 1,2

1. Press

m 8 1

to access the

Currency converter.

2. Press

. The input fields for the currency

name and rate appear.

3. Use the

{ }

keys to place the cursor at

the desired input field, then input the

currency name and its rate. In this example,

press

}

and input ‘1,2’.

• The currency name field of currency

converter is temporarily pre-defined, as

seen in the above example.

• When inputting the desired currency name, press

^ b

to clear the

input field and use no more than four letters. Use the

[ ]

keys to set the

cursor on the left/right of the currently selected input field.

• In the left input field, enter the base currency name. In the input field on the

right, place the currency name of which you wish to set the conversion rate.

• Up to 10 digits (excluding the decimal point) can be entered in the currency

rate input field.

4. Press

. The currency name and its

rate are set.

Converting currencies

The conversion calculation can be performed using the previously set conversion

rate.

Convert C

180 to US$ when setting the rate: C

1 = US$ 1,2.

1. Press

m 8 1

to display the currency

converter.

2. Input ‘180’. You may input a simple formula,

such as ‘36

5 =’, instead.