User's Manual

EN
What is included in the box
1 x PS-929
1 x Power Adapter
1 x Microphone
1 x User Manual
1 x Quick start guide
1 x Warranty Card
Panels & Controls
MODE
LIGHT
MIC/GUITAR VOL
SUPER BASS
VOLUME
1
4 5
6
7 8 9
3 102
TOP VIEW
1. LED display
2. SUPER BASS
- BASS BOOST/TWS
3. MIC/GUITAR VOL - Microphone/Guitar volume controller
4.
/MODE - Mode select/STANDY ON/OFF
5.
6. LIGHT - LED speaker lights control
7.
PLAY/PAUSE/PAIR
8.
Play previous track
9.
Play next track
10. VOLUME - Master volume
USB 1
USB 2
MIC.IN GT.IN
AUX.IN
OFF/ON
DC IN
1
2
3
4
5 6 7
REAR VIEW
1. USB - USB port for playback
2. 5V/1A - 5V 1A USB charger
3. MIC IN - Microphone input
4. GT.IN - Guitar input
5. AUX.IN - Aux input (3.5mm)
6. 15V.IN - DC power 15V input
7.
Operation instruction
Power Connection
Connect the small plug from the supplied AC/DC Adaptor to the DC 15V
(In) Jack on the rear of unit then plug the AC/DC Adaptor to a AC wall
outlet having AC 100-240V~; 50/60Hz.
Turning On
Switch the POWER switch on the rear of the speaker to the ON position.
Then press and hold the
/MODE button for 2 seconds to switch on.
, press the /MODE button for a few seconds.
Controling the master Volume
Rotate the VOLUME knob to select the desired master volume level.
Bass Boost
ect, press again to turn
.
EQ Mode select
Press the EQ/ECHO Button on the unit o to activate and set the equalizer
ect that best matches the music style: FLAT/CLASSIC/ROCK/POP/JAZZ/
LIVE/CLUB/DANCE/HALL/SOFT
ect
Press the LIGHT button repeatedly to choose one of the following light
ect settings for speakers & ring lights:
ect
L-01 Multiple colour change
L-02 Red light (in time with music rhythm)
L-03 Green light (in time with music rhythm)
L-04 Blue light (in time with music rhythm)
L-05 Yellow (in time with music rhythm)
L-06 Purple (in time with music rhythm)
L-07 Cyan (in time with music rhythm)
L-08 OFF
A long press the LIGHT button will turn the speakers & strobe lights on
.
Connect Bluetooth audio output device
To connect a Bluetooth audio output device (e.g. smart phone or tablet
PC), proceed as follows:
/MODE button once or repeatedly until the screen shows
‘bt’ to switch to the Bluetooth mode. The speaker is now in pairing
ashes on the display screen.
The party speaker will then attempt to automatically connect itself to the
last audio output device connected via Bluetooth. If this is not possible,
cation via Bluetooth and ‘bt’ ashes
on the screen.
enable search mode. On your audio output device select your speaker
"SHARP PS-929" from the list of available devices and connect the
nd more information about the Bluetooth function
of your playback device in its operating instructions.
there will be a prompt sound and the “BT LOGO” on the screen will
be solid.