User manual PS-929 Party Speaker System EN
Trademarks The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.
EN Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Please, read these safety instructions and respect the following warnings before the appliance is operated: ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the cient magnitude as to constitute a risk of electric shock to persons.
• If you plan to store your device for longer than six months, charge the battery to 50% every six months to keep it fresh. Store the device at temperatures between 5 °C and 20 °C. Battery warning! • re or chemical burn if mistreated. • Do not attempt to open the product or replace the battery. It is built-in re or explosion and the warranty will be terminated. • Dispose of batteries according to local regulations. Please recycle when re as they may explode. • Batteries may explode if damaged.
EN What is included in the box Operation instruction 1 x PS-929 1 x Power Adapter 1 x Microphone 1 x User Manual 1 x Quick start guide 1 x Warranty Card Power Connection Connect the small plug from the supplied AC/DC Adaptor to the DC 15V (In) Jack on the rear of unit then plug the AC/DC Adaptor to a AC wall outlet having AC 100-240V~; 50/60Hz. Turning On Switch the POWER switch on the rear of the speaker to the ON position. Then press and hold the /MODE button for 2 seconds to switch on.
You can control tracks being played back and the volume of the party speaker on your external device. The functions available when using an audio playback device on the party speaker will depend on your external device and the software used. Press and hold button (for 3sec.) to disconnect the current Bluetooth connection. The PS-929 will prompt “disconnected”. nd and pair with the "SHARP PS-929".
EN cation Model PS-929 Rated Power Consumption 20W Standby Power Consumption <0.5W Output Power 2 x 25 W (RMS) Total max power output 180 W Frequency Response 40Hz-15KHz Built-in lead-acid battery, DC 12V, 54Wh, 4,5Ah Battery Bluetooth Version V5.0 Maximum power transmitted <2 dbm Frequency bands 2402 MHz ~ 2480 MHz Power Adapter Model name CW1502500RE Input AC100-240V ~ 50/60Hz, 1,2A Max Output DC 15V 2,5A Shenzhen Cenwell Technology CO.
