User manual
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE MACHINE
- COPY FUNCTIONS
- PRINTER FUNCTIONS
- BASIC PRINTING
- PRINTER DRIVER SETUP SCREEN
- SETTING ADVANCED PRINTER FUNCTIONS
- PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing)
- FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size)
- ROTATE THE PRINTED IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINTED IMAGE (Zoom)
- ADJUSTING THE IMAGE EXPOSURE (image adjustment)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- SAVING FREQUENTLY USED PRINT SETTINGS
- SCANNER FUNCTIONS
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
3
1
Chapter 1
BEFORE USING THE MACHINE
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
Exterior
Document cover
Open this cover to make copies from the document
glass.
Document glass
Place an original that you wish to scan face down
here. (Page 15)
Scanner document glass locking handle
Feed tray
Expand this tray to place paper. (Page 9)
Operation panel
It contains the operation keys and indicators and is
used to select functions and enter the number of
copies. (Page 5)
Power line connector
USB 2.0 connector (A type)
It is used to connect the USB device (USB
memory) to the machine to use the "SCAN to
USB" function. (Page 29)
USB 2.0 connector (B type)
It is used to connect the machine to your computer
to use the print and scan functions.
(Page 14)
Power switch
Press to turn the machine power on and off.
(Page 6)
Output tray
Pull this tray out to receive the finished document.
Handle
Pull this handle to move the machine easily.
11
3
1
2
3
4
5
6
7
8
10
11