Operation Manual
Table Of Contents
- Introduction
- Preparations
- Wireless mode screen
- Displaying the computer screen
- Actions when a screen is displayed (touch-applicable models only)
- Exiting
- Settings
- Starting from a commercially available USB flash drive
- Uninstalling the connection software
- Using as a whiteboard (Direct Drawing) (touch-applicable models only)
- Intellectual Property Rights and Other Matters
9
E
Connect the computer to the wireless board
Directly connect the computer to the wireless board.
When using a different method, connection is necessary as well to change the settings from the factory default settings.
In addition, read your computer’s manual.
TIPS
• The factory default setting for the wireless board’s wireless LAN is 2.4 GHz.
n
Windows
1. Click on the taskbar.
2. Select the wireless board from the wireless network list.
The SSID of the wireless board is shown in the home screen of Wireless mode.
Caution
• The factory default setting for wireless LAN security is not enabled.
For security, set “Encryption” (encryption method) and a “Key”. (See page 11.)