Operation Manual

6
■Howtoturnonthepower
• Switchingtheinputofthehostdisplayto"OPTION"turnsonthisunit.
• SwitchingonofthePCControllerpowercanbelinkedwiththepoweronoperationofthe
hostdisplay.
 Whenturningonthepowerwiththeinputofthehostdisplaysetto"OPTION",thepower
supplyofthisunitwillalsobeturnedon.Inthefollowingcases,itbecomes"OPTION"state.
- Thesituationwherethehostdisplaypowersupplyisturnedoffwith"OPTION"when
"startinputmode"issetto"lastinputmode".
- "Wheninputmodeatstartup"issetto"OPTION".
• Whenturningonthepowerofthisunitinconjunctionwiththeschedulefunctionofthe
hostdisplay,makesurethatthehostdisplayturnsonwiththe"OPTION"status.
Pleasenote
• Donotturnoffthemainpowerofthehostdisplaywhenthepowerofthisunitisturned
on.
• PleaseensurethatWindowsisshutdownpropertlybeforeturningoffthepowerofthe
hostdisplayorbeforeturningoffthemainpowersupplyofthehostdisplay.
■Howtoturnoffthepower
Linkingthe"OFF"operationofthePCControllerandthehostdisplay
Whenyouset"LINKEDOFFSETTING"of"OPTIONPOWERCONTROL"ofthehostdisplayto
"ON",inaccordancewiththepowerofthehostdisplay"OFF",thepowerwillbeturnedoff.
• Whenthehostdisplayswitchestothepowerstandbystate,thePCControllerunitturnsoff.
• IfthepowersupplyofthePCControllerunitdoesnotachievetheintendedstate,waituntil
themenuoperationofthehostdisplayisreadyandwaituntilthestatusscreenofthehost
displayisdisplayedandthenperformtheoperationagain.
• Eveniftheinputmodeischangedtosomethingotherthan"OPTION",thisunitcannotbe
turnedoff.
• WhenthepowerofthisPCControllerunitison,thehostdisplaywillnotentertheinput
signalwaitstate.
• Thefollowingsettingsandfunctionsofthehostdisplaycannotbeusedwhenthepowerof
thisunitisturnedon.
- "DisplayPortstream"of"terminalsetting"ofthemainunitsettingmenu
- "AllReset1","AllReset2"in"AllReset"inthespecialfunctionmenu
• Whenthepowerofthisunitisturnedon,"ERR"isreturnedinresponsetothefollowing
controlcommand:POWR,DPST,RSET.
UnlinkingthepowerofffunctionofPCControllerandhostdisplay
Ifyouset"LINKEDOFFSETTING"of"OPTIONPOWERCONTROL"inhostdisplayto"OFF",the
unitcannotbeturnedoffevenifthehostdisplayisturnedoff.
• Evenwhenthehostdisplayswitchestothepowerstandbymode,thepowerofthisunit
remainsonandoverallpowerconsumptionincreasesinthepowerstandbymode.
• Youcannotset"POWERSAVEMODE"to"YES"onthemonitormenu.
PowerOn/Off