Owners manual

46
E
Specications
n
Product Specications
Model PN-Y556 PN-Y496 PN-Y436 PN-Y326
LCD component
55" Class
[54-5/8 inch
(138.78cm) diagonal]
TFT LCD
49" Class
[48-1/2 inch
(123.20cm) diagonal]
TFT LCD
43" Class
[42-1/2 inch
(107.98cm) diagonal]
TFT LCD
32" Class
[31-9/16 inch
(80.13cm) diagonal]
TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colors
Approx. 16.77 million colors
Pixel pitch
0.630 mm (H) ×
0.630 mm (V)
0.559 mm (H) ×
0.559 mm (V)
0.490 mm (H) ×
0.490 mm (V)
0.364 mm (H) ×
0.364 mm (V)
Max. brightness (typical) 450 cd/m
2 *1
400 cd/m
2
Contrast ratio (typical) 1,100 : 1
Viewing angle
178° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm) 47-5/8 (W) x
26-13/16 (H)
(1209.6 x 680.4)
42-1/4 (W) x
23-3/4 (H)
(1073.8 x 604.0)
37-1/16 (W) x
20-13/16 (H)
(941.2 x 529.4)
27-1/2 (W) x
15-7/16 (H)
(698.4 x 392.0)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω], HDMI
Sync signal
Horizontal/vertical separate (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input
terminals
PC/AV HDMI x 1
PC Mini D-sub 15 pin, 3 rows x 1
DVI-D 24 pin (HDCP compatible) x 1
Audio
3.5 mm mini stereo jack x 2
Serial (RS-232C)
D-sub 9 pin x 1
Output
terminals
PC
DVI-D 24 pin (HDCP compatible) x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-sub 9 pin x 1
USB port USB ash drive (Type A)
Power supply terminal 5V, 2A (USB TYPE A connector)
SD card slot SD memory card (SD memory card/SDHC memory card)
LAN terminal 10 BASE-T/100 BASE-TX
Speaker output 7 W + 7 W 5 W + 5 W
Power requirement AC 100 - 240 V,
1.2 A, 50/60 Hz
AC 100 - 240 V,
1.0 A, 50/60 Hz
AC 100 - 240 V,
0.9 A, 50/60 Hz
AC 100 - 240 V,
0.8 A, 50/60 Hz
Operating temperature *
2
32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption
(Input signal waiting mode *
3
/
standby mode *
4
)
105W (7.0W/8.0W) 87W (7.0W/8.0W) 76W (7.0W/8.0W) 69W (7.0W/8.0W)
Dimensions
(excluding protrusions) inch (mm)
Approx. 48-9/16 (W) x
1-13/16 (D) x
27-15/16 (H)
(1233.0 x 46.0 x 710.0)
Approx. 43-3/16 (W) x
1-13/16 (D) x
24-15/16 (H)
(1097.0 x 46.0 x 634.0)
Approx. 38 (W) x
1-13/16 (D) x
22 (H)
(965.0 x 46.0 x 559.0)
Approx. 28-1/2 (W) x
2-3/16 (D) x
16-11/16 (H)
(724.5 x 56.0 x 424.0)
Weight lbs. (kg) Approx. 54.0 (24.5) Approx. 44.1 (20.0) Approx. 33.1 (15.0) Approx. 19.8 (9.0)
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness.
*2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specied by the optional equipments.
If you will use the monitor in a at installation (tilted more than 20° (upward or downward)), please use at an ambient temperature
between 32°F (0°C) and 104°F (30°C).
*3 When SUPPLY USB POWER is set to OFF.
*4 When POWER SAVE MODE is set to OFF and SUPPLY USB POWER is set to OFF. When POWER SAVE MODE is set to ON: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.