Operation Manual

6
MOUNTING PRECAUTIONS

This product is for use indoors.

A mounting bracket compliant with VESA
specifications is required.

Since the monitor is heavy, consult your dealer
before installing, removing or moving the
monitor.

Mounting the monitor on the wall requires
special expertise and the work must be
performed by an authorized SHARP dealer. You
should never attempt to perform any of this work
yourself. Our company will bear no responsibility
for accidents or injuries caused by improper
mounting or mishandling

Use the monitor with the surface perpendicular
to a level surface. Do not install the product on a
ceiling or inclined wall.

This monitor should be used at an ambient
temperature between 32°F (0°C) and 104°F
(40°C). Provide enough space around the
monitor to prevent heat from accumulating inside

If it is difficult to provide sufficient space for any
reason such as the installation of the monitor
inside a housing, or if the ambient temperature
may be outside of the range of 32°F (0°C) to
104°F (40°C), install a fan or take other
measures to keep the ambient temperature
within the required range.

Temperature condition may change when using
the monitor together with the optional
equipments recommended by SHARP. In such
cases, please check the temperature condition
specified by the optional equipments.

Do not block any ventilation openings. If the
temperature inside the monitor rises, this could
lead to a malfunction.

Do not place the monitor on a device which
generates heat.

Adhere to the following when installing the
monitor in its portrait orientation. Failing to
adhere to the following may cause malfunctions.

Install the monitor such that the power LED is
located on the bottom side.

When clamping the power cord, take care not to
stress the terminal of the power cord. Do not
bend the power cord excessively.