Operation Manual

4
SAFETY PRECAUTIONS (Continued)
15. Replacement parts — In case the product needs replacement parts, make sure that the service person
uses replacement parts specified by the manufacturer, or those with the same characteristics and
performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other
danger.
16. Safety checks — Upon completion of service or repair work, request the service technician to perform
safety checks to ensure that the product is in proper operating condition.
17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the
methot recommended by the manufacturer.
18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other
heat-generating products (including amplifiers).
19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may
corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make
sure to observe the precautions below:
• CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
• Use the specified batteries only.
• Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries
according to the instructions in the compartment.
• Do not mix old and new batteries.
• Do not mix batteries of different types. Voltage specifications of batteries of the same shape
may vary.
• Replace an exhausted battery with a new one promptly.
• If you will not use the remote control for a long time, remove the batteries.
• If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets
into your eye, bathe your eye well rather than rubbing and seek medical treatment immediately.
Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or
damage your eye.
20. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to
death, personal injury, severe physical damage or other loss, including nuclear reaction control in
nuclear facility, medical life support system, and missile launch control in a weapon system. Do not stay
in contact with the parts of the product that become hot for long periods of time. Doing so may result in
low-temperature burns.
21. The socket-outlet shall be installed near the equipment and shall be easily accesible.
22. Plug the appliance to a grounded outlet. Always use the grounded power cord supplied with your
product. Manufacturer is not responsible for any damage caused unearthed usage.
WARNING:
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals:PC/AV
HDMI input terminal, PC/AV D-SUB input terminal, RS- 232C input.
If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many
injuries, particularly to children, can be avoided by taking simple pre cautions such as:
 Using fixing devices like wall mount brackets recommended by the manufacturer.
 Only using furniture that can safely support the monitor.
 Ensuring the monitor is not overhanging the edge of the supporting furniture.
 Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both
the furniture and the monitor to a suitable support.
 Not standing the monitors on cloth or other materials placed between the monitor and supporting
furniture.
 Educating children about the dangers of climbing on furniture to reach the monitor or its controls.