Operation Manual

Specifications

 Dimensional Drawings

Note that the values shown are approximate values.

When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible

mounting method. SHARP recommends using M6 screws and tighten the screws.

Mounting Precautions (For SHARP dealers and service engineers)

 When installing, removing or moving the monitor, ensure that this is carried out by at least 3 people.

 Be sure to use a Wall-mount bracket designed or designated for mounting the monitor.

 This monitor is designed to be installed on a concrete Wall or pillar. Reinforced work might be necessary

for some materials such as plaster / thin plastic board / wood before starting installation. This monitor

and bracket must be installed on a Wall which can endure at least 4 times or more the weight of the

monitor. Install by the most suitable method fort he material and the structure.

 To attach to a VESA compliant mounting bracket, use M8 screws of about 45mm length and

use additional spacers of 32mm length.

 Do not use an impact driver.

 After mounting, please carefully ensure the monitor is secure, and not able to come loose from the Wall

or mount.

 Do not use any screw holes other than VESA holes for installation.