Operation Manual

IMPORTANT INFORMATION

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW: Earth

BLUE : Neutral

BROWN: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured

markins identifying the terminals in your plug proceed as follows.

 The wire witch is coloured GREEN-AND-YELLOW must be connected to the terminal in the

plug which is marked by the letter E or by the safety earth or coloured green or green-and-

yellow.

 The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter N or coloured black.

 The wire which is coloured BROWN must be connected to the terminal which is marked with

the letter L or coloured red.

Ensured that your equipment is connected correctly. If you are in any doubt consult a qualified

electrician.

“WARNING: THIS APPARATUS MUST BE EARTHED”

The lightning flash with arrowhead

symbol, within a triangle, is intended to

alert the user to the presence of

uninsulated “dangerous voltage” within

the product’s enclosure that may be of

sufficient magnitude to constitute a risk

of electric shock to persons. The

exclamation point within a triangle is

intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in

the literature accompanying the product.

WARNING:

FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved

by the manufacturer could void the user’s authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the interference at his own expense.