Operation Manual

15
Command field (12 byte Hexadecimal)
Parameter field (1 byte Hexadecimal)
Example1: Volume set command: BE EF 03 06 00 31 D3 03 00 01 20 01 15
This command is used for setting volume value as 21 out of 100.
Example2: Backlight get command: BE EF 03 06 00 89 D2 02 00 03 20 00 00
This command is used for getting backlight value.
Be sure that the command include exactly 13 Bytes data.
 Response Code
3 type of response codes are exist.
1: RS232 get command(1 Byte)
2: True (06)
3:False(15)
Get commands don't response true or false.
 Communication Interval
After 06 or 15 returned, you must send the following commands.
Provide an interval of 350 ms or more between the command response and the transmission of the next
command.
Usage of Touch Screen with External PC
If you want to use touch screen when you connect an external PC to your INTERACTIVE MONITOR
via VGA or HDMI inputs, you should connect the external PC to your INTERACTIVE MONITOR with
a USB-USB cable as shown above. Touch screen will be activated soon.
HDMI Input
RS232 (Optional)
Audio Input
Audio Output
VGA Input
External source using the
touch screen Input