Operation Manual

14
CHAPTER 2:
USING AND ITS FUNCTIONS.
Panel
Panel type
TFT LCD
Active area
1428.48 (H) x 803.52 (V)
Visual
angle
Horizontal
178°
Vertical
178°
Max. brightness
360 cd/m2
Max. contrast
4000:1
Response time
8 ms G2G
Max. resolution
1920 * 1080
H - frequency
60 KHz ~ 73 KHz
V - frequency
47Hz ~ 63Hz (typical: 60Hz)
Controlling the Monitor with a PC (RS-232C)
You can control this interactive monitor from a PC via RS-232C (COM port) on the PC.
 PC Connection
Connect with RS-232 cross cable between the PC’s COM port (RS-232C connector) and the RS-232C input
terminal on the monitor.
 Comminucation conditions
Set the RS-232C communication settings on the PC to match the monitor’s communication settings as follows:
Boud Rate
19200
Data Lenght
8 Bits
Parity Bit
None
Stop Bit
1 Bit
Flow Control
None
 Comminucation conditions
Command Format
When a command is sent from the PC to the monitor, the monitor operates according to the received command
and sends a response message to the PC.
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
P1
RS-232 cross cable
(commercially available)
To COM port
PC
RS-232C
input terminal