Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- Part Names
- Connecting Peripheral Equipment
- Preparing the Remote Control Unit
- Connecting the Power Cord
- Binding Cables
- Removing the Handles
- Affixing the Protection Covers
- Turning Power On/Off
- Basic Operation
- Remote Control Mode
- Menu Items
- Initialization (Reset)/Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Controlling the Monitor with a PC (LAN)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
48
E
48
■ INFORMATION
Information about this monitor appears.
■ CONTROL
You can control the operations corresponding to the buttons
(
POWER
INPUT
SIZE
) on the remote control unit. (See pages 18
and 19.)
TIPS
• In standby mode, Power ON is the only operation available.
■ ADJUSTMENT
You can adjust these settings which are also available on the
monitor’s menu.
• SCREEN (See page 23.)
• PICTURE (See page 23.)
• PICTURE (ADVANCED) (See page 30.)
• AUDIO (See page 24.)
• SETUP (See page 24.)
• OPTION (See page 26.)
• SCHEDULE (See page 29.)
• MULTI (See page 27.)
• PIP/PbyP (See page 27.)
• FUNCTION (See page 31.)
TIPS
• After changing DISPLAY COLOR PATTERN to OFF, click
[Refresh] to correctly retrieve the status of the monitor.
Controlling the Monitor with a PC (LAN)