Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Preparing the Remote Control Unit
- Mounting a web camera
- Attaching the wireless adapter
- Turning Power On/Off
- Touch Pen
- Touch action
- Basic Operation
- Whiteboard
- Bytello Share
- PDF Viewer
- File Explorer
- Web Browser
- Updating the Software (Update)
- Common Settings Menu
- Administrator Settings Menu
- Reset/Functional Restriction Setting (FUNCTION Menu)
- Controlling the Monitor with a computer (RS-232C)
- Troubleshooting
- Specifications
- Intellectual Property Rights and Other Matters
- Mounting Precautions (For SHARP dealers and service engineers)
49
E
Administrator Settings Menu
n
Schedule
You can set the time to switch the monitor on and off.
Set this function with “Startup & Shutdown” in the System
menu. (See page 48.)
1. To turn the power ON at the specified time, touch “Add
Power On Schedule”.
To turn the power OFF at the specified time, touch “Add
Power Off Schedule”.
2. Set the time and day of implementation.
3. Touch “Save”.
The schedule is displayed as a list.
4. Turn on the schedule.
You can also turn off the schedule.
Caution
• Do not switch off the main power after setting the schedule.
• Specify the correct date and time. (See page 47.)
Schedule does not function unless the date and time are
specified.
• Check regularly that the set date and time are correct.
• In the power off schedule, a message is displayed on the
screen approx. 1 minute before the power turns off. If you
select “Cancel”, you can stop the power from turning off.
(When “Power Off Reminder” is set to on.)
• The power on schedule and power off schedule must be
set at an interval of 5 minutes or more.
TIPS
• Up to 14 “Schedule” items can be registered.