Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Preparing the Remote Control Unit
- Mounting a web camera
- Attaching the wireless adapter
- Turning Power On/Off
- Touch Pen
- Touch action
- Basic Operation
- Whiteboard
- Screen share (Bytello Share)
- PDF Viewer
- Printing
- File Explorer
- Web Browser
- Updating the Software (Update)
- Common Settings Menu
- Administrator Settings Menu
- Reset/Functional Restriction Setting (FUNCTION Menu)
- Controlling the Monitor with a computer (RS-232C)
- Controlling the Monitor with a computer (LAN)
- Troubleshooting
- Specifications
- Intellectual Property Rights and Other Matters
- Mounting Precautions (For SHARP dealers and service engineers)
46
E
Administrator Settings Menu
Menu item details
n
Setup
Monitor
Lock Admin Password
Sets whether or not a password is necessary when using “Administrator Settings”, “FUNCTION”, and “Updater”.
Operation Mode
“Mode1” is the recommended setting and conforms to the “Normal Configuration” as defined in the EcoDesign Regulation
(2019/2021).
Mode1 ................... “Power Management” is set to “Power Standby” and “Power Save Mode” is set to on.
These settings can not be changed.
Mode2 ................... “Power Management” is set to “Signal Waiting Mode” and “Power Save Mode” is set to off.
These settings can be changed.
Power Save Mode
When set to off, startup time from standby state is reduced. Note, however, that more power will be consumed in standby
state. Android continues to run in standby state.
When set to on, standby state is standby mode. Current consumption is reduced while the monitor is in standby state.
Android is also shut down. Note, however, that the startup time from standby state becomes longer.
If set to on, certain RS-232C commands cannot be used in standby mode. (See page 52.)
Power Management
Sets whether or not to move to input signal waiting state or standby state in the nosignal state.
Disabled .............................................. Do not move.
Signal Waiting Mode ........................... Move to input signal waiting state.
Power Standby ....................................
If the nosignal state continues for approximately 5 minutes, the monitor moves to the standby state.
The application data that is not saved is lost.
Off if No Operation
Determines whether or not to set the monitor to go into standby state when there is no operation by the remote control unit,
touch or RS-232C control.
Home Screen Settings
App Icon Layout on Home Screen
Sets the icons of the applications to be arranged on the home screen of APPLICATION mode.
Synappx Settings
Synappx Setting .................................. Sets whether or not to display the “Synappx” icon on the home screen of
APPLICATION mode.
Input for Synappx ................................ When “Synappx Setting” is set to on, sets the input terminal to which the computer on
which Synappx is installed is connected.
Toolbar
Sets whether or not to display the toolbar.
Others
Logo Screen
Sets whether or not to display the logo screen when turning the power on.
Enable USB Drive
Sets whether or not to allow the use of a USB flash drive.
Wallpaper
Sets the background of the home screen of APPLICATION mode.