Operation Manual
Table Of Contents
- Introduction
- Operating Environment
- Installing the software
- Starting the application
- Screen guide
- Operating a monitor from a tablet device
- Sending files from the Computer to a tablet device
- Sending files from a tablet device to the Computer
- Sharing screen display
- Operating files
- Viewing Operation Guide
- Configuring host settings
- Exiting the application
- Uninstalling the software
- Trademarks
- 4 -
Example System Configuration
Monitor
Computer
(Host)
Tablet devices
Wireless LAN
Access point
Monitor ■
SHARP monitors (as of November 2012)
PN-L601B / PN-L602B / PN-L702B / PN-L802B
Computer ■
The computer must fulfill the requirements below.
CPU
Intel Celeron or AMD Sempron 1.6 GHz or faster
Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended
OS
Windows XP (32-bit or 64-bit version), Windows Vista (32-bit or 64-bit
version), Windows 7 (32-bit or 64-bit version)
Memory At least 2 GB
Free space on hard drive At least 100 MB
Pen Software version 2.5.2.5 or later must be installed in order to use Pen Software
functions.
Tablet devices ■
Android devices (as of November 2012)
• Asus Eee Pad Transformer TF101
• Samsung Galaxy Tab 10.1 GT-P7510
• Motorola Xoom MZ604, Xoom2 MZ615
(Android 2.3.3 or later with English language support)
* Insert an SD card.
The software may not function properly if an SD card is not inserted.
iOS devices (as of November 2012)
Apple iPad, iPad 2, and iPad (third generation) (iOS 5.0 or later with English language support)
Wireless LAN environment (Wi-Fi) ■
Requires a local network with wireless LAN connection capabilities.
Ensure that the tablet device is ready to connect to the local network.
For connection settings, refer to the manual for the tablet device or access point.
TIPS
• A maximum of 20 tablet devices may be connected to a single host at the same time.
The number of devices that can be connected may be lower depending on network
environment and other factors.
• If this application goes into standby mode because a tablet device is locked, the Home
button is pressed, another application is started, or a similar event occurs while this
application is running, the following happens:
Android device
The current process is canceled.
File transmission and reception is processed in the background.
To start using the software again, reconnect to the host.
iOS device
The current process is canceled.
File transmission and reception continues but is interrupted once the time that iOS can
process background tasks (maximum 10 minutes) has elapsed.
To start using the software again, reconnect to the host.
Operating Environment
A monitor, computer connected to a monitor, and tablet device are required.
A wireless LAN environment is required to connect tablet devices to the network.