PN-K321H Operation-Manual GB
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- Part Names
- Installing the stand (supplied)
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Turning Power On/Off
- Basic Operation
- Menu Items
- Initialization (Reset)/Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)

16
E
Basic Operation
1
2
3
4
5
6
7
1. Power button ( )
Press this button to turn the power ON/OFF.
2,3. Brightness adjustment button (
/ )
The brightness menu appears.
BRIGHT 15
Adjust the brightness with the brightness adjustment button
(
/ ).
* If you do not press any buttons for about 4 seconds, the
BRIGHT menu automatically disappears.
Move the cursor left or right in the menu screen, and increase
or decrease the setting.
* The cursor moves right when the brightness adjustment
button (
) is pressed, and left when the brightness
adjustment button (
) is pressed.
4,5. [VOL+/
]/[VOL-/ ] button
The volume menu appears.
V OLUME 15
Adjust the volume with the [VOL+/ ]/[VOL-/ ] buttons.
* If you do not press any buttons for about 4 seconds, the
VOLUME menu automatically disappears.
Move the cursor up or down in the menu screen, and increase
or decrease the setting.
* The cursor moves up when the [VOL+/
] button is
pressed, and down when the [VOL-/
] button is pressed.
6. [MENU/ENTER] button
Displays and turns off the menu screen. (See page 18.)
Settings can be entered when the menu screen is displayed.
7. [RETURN] button
In a menu screen, returns the cursor to the previous screen.
TIPS
• Ifyouareusingtheverticalsticker(Operationbuttons),
substitute the following for the button displays.
- Brightness adjustment button (
/ )
→Brightnessadjustmentbutton(
/ )
- [VOL+/
]/[VOL-/ ] button
→[VOL+/
]/[VOL-/ ] button
• Ifyouareusingthehorizontalsticker(Operationbuttons),
substitute the following for the button displays.
- Brightness adjustment button (
/ )
→Brightnessadjustmentbutton(
/ )
- [VOL+/
]/[VOL-/ ] button
→[
/ VOL+]/[VOL-/ ] button