PN-K321H Operation-Manual GB
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- Part Names
- Installing the stand (supplied)
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Turning Power On/Off
- Basic Operation
- Menu Items
- Initialization (Reset)/Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
11
E
n
Height/angle adjustment
• Adjusting the height
Adjust to a height that is easy to view.
Approx.
5-29/32inch (15cm)
TIPS
• The height cannot be adjusted in a vertical installation.
• Adjusting the angle
Adjust to an angle that is easy to view.
Approx.45°
Approx.25°
Approx.5°
Approx.45°
Caution
• When moving the monitor, be sure to grasp only the frame.
Grasping and applying pressure to the LCD panel may
damage it.
• Take care not to pinch your ngers.
• If you are installing the monitor in landscape orientation,
take caution when adjusting the angle at a raised height, so
that it does not topple.
Installing the stand (supplied)