Operation Manual

19
E
Touch Panel / Touch Pen Preparations
Connecting the touch pen adapter
To use the touch pen, insert the touch pen adapter into the
touch pen adapter port on the monitor.
Touch pen
adaptor
To
uch pen
adapter scre
w
(antitheft)
T
ouch pen
adapter por
t
Touch Pen Preparations
n
Inserting the battery
2 touch pens are supplied. Insert the batteries in the touch
pens.
1. Remove the battery cap and main cover.
Battery capMain cover
1
2
If the battery cap is difcult to turn, grasp the top and
bottom of the battery cap to turn.
2. Open the battery cover and insert the supplied battery
(LR03 (“AAA” size) x 1) into the touch pen.
Check the plus (+) and minus (-) markings on the inside
of the touch pen and insert the battery in the correct
orientation.
Battery cover
3. Replace the battery cover and main cover.
While pressing the battery cover, replace the main cover.
1
2
4. Replace the battery cap.
2
1
TIPS
• Life of supplied battery is dependent on how it is stored.
• If the touch pen will not be used for an extended time,
remove the battery from the touch pen.
• Use only alkaline battery for replacement.
Computer preparations
To use the touch panel, the touch pen and the eraser, install
the software below.
• Touch pen Management Tool
• Pen Software
To install the software, see the manual for each.