Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Preparing the Remote Control Unit
- Removing the Handles
- Mounting a web camera
- Turning Power On/Off
- Touch Panel / Touch Pen Preparations
- Touch action
- Basic Operation
- Menu Items
- Initialization (Reset)/Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a computer (RS-232C)
- Controlling the Monitor with a computer (LAN)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
66
E
Specications
n
Product Specications
Model PN-70TH5
LCD component
70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD
Max. resolution (pixels)
3840 x 2160
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.401
mm
(H) × 0.401
mm
(V)
Brightness (typical) 300 cd/m
2
*
1
Contrast ratio (typical) 4000: 1
Viewing angle
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
60-9/16 (W) x 34-1/16 (H) (1538.9 x 865.6)
Computer input signal
Analog RGB (0.7 Vp-p) [75 Ω], HDMI, DisplayPort 1.2a
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green*
2
,
Composite sync (TTL: positive/negative)*
2
Plug and play
VESA DDC2B
Power management
VESA DPMS
Input terminals
Video HDMI x 3
Mini D-sub 15 pin, 3 rows x 1
DisplayPort x 2
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
3.5 mm mini jack x 1
Output terminals
Video
DisplayPort x 1
Audio
3.5 mm mini stereo jack x 1
LAN terminal 10 BASE-T/100 BASE-TX
Speaker output (internal/external) 10 W + 10 W/10 W + 10 W
6 Ω
Touch Panel
Detection method Capacitive type
Computer connector USB (2.0 compliant) (Type B) x 2
Touch pen
Wireless communication method
(2.4GHz, Bluetooth Low Energy, FHSS method)
Touch pen adapter port
USB (2.0 compliant) (Type A)
Expansion slot 13 V, 2.4 A
(power supplied when expanding the functions with an optional part)
Power requirement AC 100 V - 240 V, 2.5 A, 50/60 Hz
Operating temperature
*
3
*
4
41°F to 95°F (5°C to 35°C)
Operating humidity
*
4
20% to 80% (no condensation)
Power consumption
(Input signal waiting mode
*
5
/standby mode
*
6
)
215 W (7.0 W / 0.5 W)
Dimensions (excluding protrusions) inch (mm)
Approx. 63-1/2 (W) x 3-5/8 (D) x 37-1/16 (H) (1612.5 x 92.5 x 941.4)
Weight lbs. (kg)
Approx. 125.7 (57)
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness.
*2 D-sub input terminal only.
*3 When using the monitor laying at on a surface (when the monitor is tilted more than 20 degrees upward from the perpendicular in relation
to a level surface), use the monitor at the ambient temperature between 41°F (5°C) and 86°F (30°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specied by the optional equipments.
*4 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satised.
*5 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF.
*6 When POWER SAVE MODE is set to ON. When POWER SAVE MODE is set to OFF: 1.0 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.