Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Preparing the Remote Control Unit
- Removing the Handles
- Mounting a web camera
- Turning Power On/Off
- Touch Panel / Touch Pen Preparations
- Touch action
- Basic Operation
- Menu Items
- Initialization (Reset)/Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a computer (RS-232C)
- Controlling the Monitor with a computer (LAN)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
51
E
Controlling the Monitor with a computer (RS-232C)
Function
Command Direction
Parameter Reply Control/Response contents *
AUDIO
OPTION
SPEAKER SELECT
SPSL WR 0-1 0-1
0: Internal speaker, 1: External speaker
○
AUDIO OUTPUT
AOUT WR 0-2 0-2
0: VARIABLE1, 1: FIXED, 2: VARIABLE2
AUDIO INPUT LEVEL
AIVP WR 0-1 0-1
0: 1.0Vrms, 1: 0.5Vrms
MONAURAL AUDIO
MONO WR 0-1 0-1
0: OFF, 1: ON
TOUCH INPUT
SELECT
BOTTOM USB
(Long side)
USCB WR
0-6, 8 0-6, 8
0: INVALID, 1: BOTTOM INPUT TERM. (Long side), 2: DisplayPort1, 3: HDMI1,
4: HDMI2, 5: HDMI3, 6: D-SUB, 8:DisplayPort2
SIDE USB (Short side) USCS WR
0-6, 8 0-6, 8
0: INVALID, 1: SIDE INPUT TERM. (Short side), 2: DisplayPort1, 3: HDMI1,
4: HDMI2, 5: HDMI3, 6: D-SUB, 8:DisplayPort2
START INPUT MODE SUIM
WR 1-5, 7, 10-11 1-5, 7, 10-11
1: LAST INPUT MODE, 2: DisplayPort1, 3: HDMI1, 4: HDMI2, 5: HDMI3,
7: D-SUB, 10:OPTION (valid when you have used the expansion slot to expand
the functions), 11:DisplayPort2
COMMUNICATION
SETTING
RS-232C/LAN
SELECT
CTLS WR
0-1 0-1
0: RS-232C, 1: LAN
●
BAUD RATE BAUD WR
0-2 0-2
0: 9600bps, 1: 19200bps, 2: 38400bps
○
Crestron Connected CRCN WR
0-1 0-1
0: OFF, 1: ON
REMOTE No. RCNO WR 0-9 0-9 Sets the number of the remote control unit.
MONITOR menu
Function
Command Direction
Parameter Reply Control/Response contents *
PORTRAIT/LANDSCAPE INSTALL STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT
○
HORIZONTAL INSTALLATION MLAY WR 0-1 0-1 0: OFF, 1: FACE UP
OSD H-POSITION OSDH WR 0-100 0-100
OSD V-POSITION OSDV WR 0-100 0-100
OPERATION MODE FNCM WR 0-1 0-1 0: MODE1, 1: MODE2
POWER SAVE MODE STBM WR 0-1 0-1 0: OFF, 1: ON
OFF IF NO OPERATION ATOF WR 0-1 0-1 0: OFF, 1: ON
TIME AOFT WR 1-12 1-12 1-12: 1-12 hours
POWER ON DELAY PODS WR 0-1 0-1 0: OFF, 1: ON
INTERVAL PWOD WR 1-60 1-60 1-60: 1-60 seconds
SELF ADJUST AADJ WR 0-1 0-1 0: OFF, 1: ON
START TIMING AADD WR 10-200 10-200 10: 1 second through 200: 20 seconds
TOUCH OUTPUT
INVALID DISP.
TOUCH OUTPUT
INVALID ICON
TOPI WR 0-1 0-1 0: OFF, 1: ON
CHANGE DISPLAY
POSITION
TOIP WR 0-3 0-3 0: UPPER RIGHT, 1: UPPER LEFT, 2: LOWER RIGHT, 3: LOWER LEFT
TOUCH OPERATION MODE TOMD WR 0-1, 3 0-1, 3 0: AUTO, 1: MULTI-TOUCH MODE, 3: SINGLE-TOUCH MODE
“ERR” when the touch panel is not connected.
-
TOUCH PANEL MODE GMDP WR 0-1 0-1 0: OFF, 1: ON (When the input mode is HDMI, D-SUB[RGB], DisplayPort,
OPTION)
○
PALM CANCEL MODE PARE WR 0-1 0-1 0: OFF, 1: ON