Operation Manual

33
E
Specications
n
Product Specications
Model PN-70SC3
LCD component
70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 16.77 million colors
Pixel pitch
0.802 mm (H) × 0.802 mm (V)
Viewing angle
160° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
60-9/16 (W) x 34-1/16 (H) (1538.9 x 865.6)
Computer input signal
Analog RGB (0.7 Vp-p) [75
Ω
],
HDMI
Sync signal
Horizontal/vertical separate (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Input terminals
PC/AV HDMI x 3
PC Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
AV
Composite video
RCA
*
1
x 2
Component
RCA
(Y, Cb/Pb, Cr/Pr) *
1
x 1
Audio
RCA pin (L/R) x 2
Serial (RS-232C) D-sub 9 pin x 1
Output terminals Audio
RCA pin (L/R) x 1
Speaker output (internal/external) 10 W + 10 W/10 W + 10 W
6
Ω
Touch Panel
Detection method Infrared blocking detection method
PC connector USB (2.0 compliant) x 1
Power requirement AC 100 V - 240 V, 2.7 A, 50/60 Hz
Operating temperature
*
2
41°F to 95°F (5°C to 35°C)
Operating humidity
*
2
20% to 80% (no condensation)
Power consumption (Maximum / standby mode
*
3
) 235 W / 0.5 W
Dimensions (excluding protrusions) inch (mm)
Approx. 64-5/16 (W) x 4-5/16 (D) x 39-1/8 (H) (1633 x 109 x 994.5)
Weight lbs. (kg)
Approx. 123.5 (56)
*1 Composite video and component cannot be used simultaneously.
*2 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satised.
*3 When QUICK START is set to OFF. When QUICK START is set to ON: 23 W or less.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.