Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Affixing the Stand Hole Protection Covers
- Preparing the Remote Control Unit
- Turning Power On/Off
- Touch action
- Basic Operation
- Menu Items
- Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
14
E
Cable clamp
(affixing type)
Affixing point
Cable
The supplied cable clamps (afxing type) can be used to clamp the USB cable and cables connected to the back of the monitor.
Caution
• Attach the supplied cable clamps to a at surface. Do not attach over a vent.
• Remove any dust or dirt before attaching.
Be sure to clamp the power cord (supplied) using the supplied cable clamp. When clamping the power cord, take care not to
stress the terminal of the power cord. Do not bend the power cord excessively.
Affixing point
Power cord (Supplied)
Binding Cables
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
• When all connections are complete, connect the power
cord.
1. Plug the power cord (supplied) into the AC input terminal.
2. Plug the power cord (supplied) into the AC power outlet.
TIPS
• Be sure to clamp the power cord (supplied) using the
supplied cable clamp.
1
Power cord (Supplied)
For power
outlet
2
AC input terminal