Operation Manual

39
E
RS-232C command table
How to read the command table
Command: Command field (See page 37.)
Direction: W When the “Parameter” is set in the parameter field (see page 37), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????” or “
?” in the
parameter field. (See page 37.)
Parameter: Parameter field (See page 37.)
Reply: Response (Returned value)
TIPS
• Inthestandbymode,theonlycommandthatisusedisPowercontrol.
Power control/Input mode selection
Function Command Direction Parameter Reply Control/Response contents
Powercontrol POWR W 0 Switchestostandbymode.
1 Returns from standby mode.*
R 0 Standby mode
1 Normal mode
Input mode selection INPS W 0 Toggle change for input mode.
2 VGA1
3 YPBPR
4 AV
10 HDMI 1
13 HDMI 2
16 VGA2
18 HDMI 3
21 OPS
“ERR”whennothingisattachedintheexpansionslot.
24 APPLICATION
R 2 VGA1
3 YPBPR
4 AV
10 HDMI 1
13 HDMI 2
16 VGA2
18 HDMI 3
21 OPS
24 APPLICATION
* Youcanuse“WakeOnLAN(MagicPacket)”toturnonthepowerviaLAN.
ItisnotpossibletoturnonthemonitorwiththeIPControlcommand.
Image menu
Function Command Direction Parameter Reply Control/Response contents
BRIGHT VLMP WR 0-100 0-100
SIZE (Screen size selection) WIDE W 0 0 Toggle change for screen size.
WR 1-3 1-3 1: 16:9, 2: Dot by Dot, 3: 4:3
Settings menu
Function Command Direction Parameter Reply Control/Response contents
VOLUME VOLM WR 0-100 0-100
MUTE AUDIO MUTE WR 0-1 0-1 0: OFF, 1: ON
Controlling the Monitor with a computer (RS-232C)