Operation Manual

16
E
Caution
• Turnonthemonitorfirstbeforeturningonthecomputeror
playback device.
• WhenswitchingthemainpowerswitchorthePOWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
Turning on the main power
Main power switch
When you turn on the main power, the monitor enters standby
mode.
Caution
• Themainpowermustbeturnedon/offwiththemainpower
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• Foracompleteelectricaldisconnection,pulloutthemain
plug.
Turning Power On/Off
Turning power on/off
Press the POWER button to turn the power ON/OFF.
Power LED
POWER button
Status Status of the monitor
Blue lit Power on
Red lit Power off (Standby mode)
TIPS
• Whenthemainpowerswitchisoff,themonitorcannotbe
turned on.
n
Operation mode
When the monitor is turned on for the first time after being
shipped from the factory, the operation mode setting screen
will be displayed. Set it to Mode1 or Mode2.
Mode1......Off If No Operation is set to On, and Power Save
Mode is set to On. (These settings can not be
changed.)
If there is no operation for 4 hours or more, the
monitor automatically enters standby mode. Power
consumption in standby mode is also minimized.
Mode2......Will perform standard operation.
Off If No Operation is set to Off, and Power Save
Mode is set to Off. These settings can be changed.
Even after being set, changes can be made using Operation
Mode, located in the menu of the monitor. (See page 33.)