Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Removing the Handles
- Preparing the Remote Control Unit
- Mounting a web camera
- Turning Power On/Off
- Basic Operation
- Touch action
- Menu Items
- Controlling the Monitor with a computer (RS-232C)
- Troubleshooting
- Specifications
- Information on the software license for this product
- Mounting Precautions (For SHARP dealers and service engineers)
32
E
RS-232C command table
How to read the command table
Command: Command eld (See page 30.)
Direction: W When the “Parameter” is set in the parameter eld (see page 30), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????” or “
?” in the
parameter eld (see page 30).
Parameter: Parameter eld (See page 30.)
Reply: Response (Returned value)
Controlling the Monitor with a computer (RS-232C)
Power control/Input mode selection
Function
Command Direction
Parameter Reply Control/Response contents
POWER CONTROL POWR W 0
Switches to standby mode.
1 Enters the power ON state.
R 0 Standby mode
1 Normal mode
2 Input signal waiting mode
INPUT MODE SELECTION INPS W 0 Toggle change for input mode. Terminals not selected in INPUT SELECT cannot be
selected.
2 D-SUB
10 HDMI1
13 HDMI2
18 HDMI3
23 HDMI4
14 DisplayPort
21 OPTION
R 2 D-SUB
10 HDMI1
13 HDMI2
18 HDMI3
23 HDMI4
14 DisplayPort
21 OPTION
SCREEN menu
Function
Command Direction
Parameter Reply Control/Response contents
SIZE WIDE WR 1 1 WIDE
3 3 Dot by dot
6 6 NORMAL
PICTURE menu
Function
Command Direction
Parameter Reply Control/Response contents
BRIGHT VLMP WR 0-31 0-31
COLOR MODE BMOD WR 0 0 STD (PC)
4 4 HIGH ILLUMINANCE
9 9 AV
10 10 USER