Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Removing the Handles
- Preparing the Remote Control Unit
- Mounting a web camera
- Turning Power On/Off
- Basic Operation
- Touch action
- Menu Items
- Controlling the Monitor with a computer (RS-232C)
- Troubleshooting
- Specifications
- Information on the software license for this product
- Mounting Precautions (For SHARP dealers and service engineers)
28
E
■ OTHERS ( )
POWER MANAGEMENT
POWERMANAGEMENTdetermineswhetherornottoswitchmodesfromnosignaltotheinputsignalwaitingmode.
NO SIGNAL AUTO INPUT SEL.
Specifywhethertochangeinputsautomatically.WhenONisselectedandnosignalispresentintheselectedinputmode,the
monitor automatically changes the selected mode to another mode where a video signal is present.
LOGO SCREEN
Sets whether or not to display the logo screen.
RESUME BY TOUCH
Set whether or not the screen is restored when touched in the input signal waiting mode.
OFF ....................Turn off screen restoration.
ON ......................Turn on screen restoration. Note that this will increase power consumption in the input signal waiting mode.
OPTION
Setwhetherornottheexpansionslotisused.
MONITOR LOCK
You can disable operations on the monitor and the remote control unit that use buttons.
OFF .....................................Enables operation.
REMOTE CONTROL ........... Prohibits remote control operation.
MONITOR BUTTONS ......... Prohibits monitor button operation.
BOTH ................................... Prohibits remote control and monitor button operation.
Toreleasetheoperationlock,performthestepsbelow.
1. Press the SIZE button until “F” appears in the upper left corner of the screen.
2. While“F”isdisplayed,pressthe
, , , buttons in that order.
Menu Items