Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Removing the Handles
- Preparing the Remote Control Unit
- Mounting a web camera
- Turning Power On/Off
- Basic Operation
- Touch action
- Menu Items
- Controlling the Monitor with a computer (RS-232C)
- Troubleshooting
- Specifications
- Information on the software license for this product
- Mounting Precautions (For SHARP dealers and service engineers)
19
E
16. BRIGHT +/- (Brightness adjustment)
Press + or - to display the brightness menu and adjust the
brightness.
* If you do not press any buttons for approx. 3 seconds, the
BRIGHT menu automatically disappears.
17. INPUT (Input mode selection)
The menu is displayed. Press the
or button to select the
input mode, and press ENTER button to enter.
Input mode Video Audio
DisplayPort DisplayPort input terminal
*2
HDMI1 HDMI1 input terminal
HDMI2 HDMI2 input terminal
HDMI3 HDMI3 input terminal
HDMI4 HDMI4 input terminal
D-SUB D-sub input terminal
Audio input
terminal
OPTION
*1
Expansion slot
*2
*1 This is displayed when you have used the expansion slot
to expand the functions.
*2 Select the terminal for AUDIO SELECT of the AUDIO
menu which is used for audio input. (See page 26.)
18. MENU
Displays and turns off the menu screen. (See page 24.)
19. Cursor
These buttons are used to perform operations such as
selecting items, changing adjustment values, and moving the
cursor.
20. RETURN
Returns to the previous screen.
21. HDMI1
Switch the input mode to HDMI1.
22. D-SUB
Switch the input mode to D-SUB.
Basic Operation
n
Switching of the USB and touch panel
connection
• Switching of the USB and touch panel connection when the
input mode is changed to or from OPTION depends on the
USB PORT SELECTION setting in the SETUP menu.
• When set to AUTO, the connection changes to the
expansion slot device or the computer connected to this
monitor’s USB port (for touch panel).
• When set to EXTERNAL/OPTION, the connection is xed
at the computer connected to this monitor’s USB port (for
touch panel) / expansion slot device and does not change.