Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Attaching the logo sticker
- Preparing the Remote Control Unit
- Mounting a web camera
- Turning Power On/Off
- Basic Operation
- Touch action
- Menu Items
- Controlling the Monitor with a computer (RS-232C)
- Controlling the Monitor with a computer (LAN)
- Troubleshooting
- Specifications
- Information on the software license for this product
- Mounting Precautions (For SHARP dealers and service engineers)
37
E
Controlling the Monitor with a computer (LAN)
Crestron Connected
You use the web browser on a computer on the LAN to control
the monitor.
Access the monitor using the web browser.
1. Launch the web browser on the computer.
2. In the “Address” box, type “http://” followed by your
monitor’s IP address followed by “/”, then press the
Enter key.
You can conrm the IP address with the INFORMATION
function.
Display the Crestron Connected control menu.
Control Menu
1
2
3
4
5
1. Operate below functions.
• Power.........Turn the power ON/OFF.
• Mute ........... Turns off the volume temporarily.
• Vol-/Vol+ ....Adjust the volume of the sound.
2. Change the input mode.
3. Operate below functions.
• Contrast ........ Adjusts the contrast.
• Sharpness..... Adjusts the sharpness.
4. Operates the menu screen for the monitor.
5. Switches the pages to tools, information and help tab.
Tools
1
2
3
1. Setting for Crestron Control.
2. Setting for monitor network.
• DHCP
• IP Address
• Subnet Mask
• Default Gateway
3. Security Setting.
Sets the password for the user and administrators rights on
Control Menu.
Info
1
2
1. Display below information.
• Display Name
• Mac Address
• Resolution
2. Display below status.
• Power Status
• Input
Help
Sends or receives messages to the administrators who uses
“Crestron Connected”.