Operating instructions

47
E
Specications
n
Product Specications
Model PN-U553 PN-U473 PN-U423
LCD component
55" Class [54-5/8 inch
(138.7cm) diagonal]
TFT LCD
47" Class [46-15/16
inch (119.3cm)
diagonal] TFT LCD
42" Class [42 inch
(106.7cm) diagonal]
TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.63 mm (H) ×
0.63 mm (V)
0.5415 mm (H) ×
0.5415 mm (V)
0.4845 mm (H) ×
0.4845 mm (V)
Viewing angle
178° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
47-5/8 x 26-13/16
(1209.6 x 680.4)
40-15/16 x 23
(1039.68 x 584.82)
36-5/8 x 20-5/8
(930.24 x 523.26)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω],
DisplayPort 1.1
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input terminals
PC/AV HDMI x 1
PC Mini D-sub 15 pin, 3 rows x 1
DisplayPort x 1
DVI-D 24 pin (HDCP compatible) x 1
AV Component: BNC (Y, Cb/Pb, Cr/Pr) x 1
*
1
Composite video: BNC x 1
*
1
Audio
3.5 mm mini stereo jack x 1
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
Output terminals PC
DVI-D 24 pin (HDCP compatible) x 1
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
LAN terminal 10 BASE-T/100 BASE-TX
Speaker output 10 W + 10 W
Power requirement AC 100 - 240 V, ●● A,
50/60 Hz
AC 100 - 240 V, ●● A,
50/60 Hz
AC 100 - 240 V, ●● A,
50/60 Hz
Operating temperature
*
2
32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption
(Input signal waiting mode / standby mode
*
3
)
235 W (●● W / ●● W) 220 W (●● W / ●● W) 210 W (●● W / ●● W)
Dimensions (excluding protrusions) inch (mm)
Approx. 49-3/16 (W) x
2-1/4 (D) x 28-3/8 (H)
(1250 x 57 x 721)
Approx. 42-5/8 (W) x
2-3/16 (D) x 24-11/16 (H)
(1083 x 55 x 627)
Approx. 38-5/16 (W) x
2-1/4 (D) x 22-1/4 (H)
(973 x 57 x 565)
Weight lbs. (kg)
Approx. 55.2 (25) Approx. 41.9 (19) Approx. 35.3 (16)
*1 Cannot be used simultaneously.
*2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specied by the optional equipments.
*3 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.