Quick Guide

ManualsBrandsSharp ManualsMonitorsPN-L603A

3. Launch “Whiteboard”.

At previous #1 if you press the POWER button ,

“Whiteboard” is launched automatically.

PN-L703A/L603A

Brief Guide ver1.1

Turn on power and launch “Whiteboard”

1. Press the POWER button.

2. Prepare “Touch pen”.

Inserting the battery.

Draw character on “White board”

POWER button / Power LED

[Notice]

If main power is turned off,

please turn on this.

[Notice] Default setting

・Function button 1：Right mouse click

・Function button 2：PageDown

・Function button 3：PageUp

*When the function button is pressed, the battery indicator

illuminates. If the battery indicator does not illuminate,

please check if the battery is depleted.

[Notice]

Even if you touch the launch button in bottom and touch

“Whiteboard”, you can launch.

2. “Square menu” like following image appears.

3. Touch “Pen１” icon.

4. Set on the setting menu like following image.

・Please select the kind of pen

(Standard pen/Brush pen

/Marker/Figure pen), Color

(Black/Red/Blue/Green/Yellow

/White), Size(１～５).

・When you finish setting, please touch “Close” icon.

5. You can create size and color which you want .

・Touch “Custom” icon ,

Then you can set size and color.

You can draw character by touching display

(White board area) with pen.

Bundled pen

1. Touch the indicator (menu icon) .

●Change size and color of pen

[ Notice]

・You can draw by 4 people at same time.

・You can use max. 100 sheets.

*If you use pensoftware by external PC,

you can use max. 1000 sheets.

*If file is heavy, reading time / moving sheet takes a lot time.

Summary of content (6 pages)

PAGE 1
Brief Guide ver1.1 PN-L703A/L603A Turn on power and launch “Whiteboard” 1. Press the POWER button. 3. Launch “Whiteboard”. [Notice] If main power is turned off, please turn on this. At previous #1 if you press the POWER button “Whiteboard” is launched automatically. [Notice] Even if you touch the launch button “Whiteboard”, you can launch. , in bottom and touch POWER button / Power LED 2. Prepare “Touch pen”. Inserting the battery.
PAGE 2
Erase character ●Erase by bundled eraser ・You can erase by moving softly with bundled eraser. ●Change the size of eraser 1. Double click “Eraser” icon on “Square menu”. ・If you have already selected “eraser”, please touch “Eraser” icon again. Bundled eraser 2. Select the size and touch from following 4 images. ●Erase by bundled pen ・Touch “Eraser” icon on “Square menu”, and then you can erase by touching (like moving softly) the area which you want to erase. ●Erase all item on sheet 1.
PAGE 3
Save the data [ Notice] ・You can not save the data into display. If you want to save the data, please prepare USB flash drive. ・If you want to use USB flash drive with security, please use a drive with hardware security. You can not use a drive with software security since security software can not be installed into display. 4. Select the file save location (USB flash drive) and touch “OK”. 1. Insert USB flash drive. USB I/F 5. Touch “OK”.
PAGE 4
Eject a USB flash drive 1. Touch “Eject USB Media” from launcher menu. 2. Select a USB flash drive. Select a USB flash drive which you want to eject, and touch “Stop”. Turn off power 1. Press POWER button in left bottom. The display will go whiteboard standby mode. 2. Hold down POWER button [Notice] If you want to turn off main power, please turn off main power after you check whiteboard has shout down (after you can see Orange lit). in left bottom until the exit screen appears.
PAGE 5
Other function ●Quick start ・This display have quick start function which you can start within around 5 seconds from pressing the POWER button. Please set “Whiteboard standby mode” in advance by referring to follows. ■Preparation in advance ■Quick start, and “whiteboard standby mode” again 1) Insert POWER code to socket and turn on main power.
PAGE 6
Other function ●Presentation / Play movie ・You can have a presentation by bundled file viewer and play movie by bundled media player w/o external PC. ・When insert USB flash drive with some data, and then you can open from “Open File” of launcher menu. USB I/F *If you insert USB flash drive to USB I/F of bottom side, You can not save the data. ・ Please refer to supported file as follows.