Quick Guide

8
E
• Wheninstalling,removingormovingthemonitor,ensurethatthisiscarriedoutbyatleast2people.
• Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor.
• Thismonitorisdesignedtobeinstalledonaconcretewallorpillar.Reinforcedworkmightbenecessaryforsomematerials
suchasplaster/thinplasticboard/woodbeforestartinginstallation.
Thismonitorandbracketmustbeinstalledonawallwhichcanendureatleast4timesormoretheweightofthemonitor.
Installbythemostsuitablemethodforthematerialandthestructure.
• ToattachaVESA-compliantmountingbracket,useM6screwsthatare5/16inch(8mm)to3/8inch(10mm)longerthanthe
thicknessofthemountingbracket.
• Aftermounting,pleasecarefullyensurethemonitorissecure,andnotabletocomeloosefromthewallormount.
• DonotuseanyscrewholesotherthanVESAholesforinstallation.
Model PN-L602B
Powerrequirement AC100V-240V,2.0A,50/60Hz
Operatingtemperature
*
41°Fto95°F(5°Cto35°C)
Operatinghumidity 20%to80%(nocondensation)
Powerconsumption(Maximum) 165W[WhenPN-ZB01(optional)isattached:170W]
Dimensions(excludingprotrusions) inch(mm)
Approx.56-11/16(W)x4(D)x33-11/16(H)(1,440x101x855)
Weight lbs.(kg)
Approx.119.0(54)
[PN-ZB01(optional):
Approx.
1.102(0.5)]
* TemperatureconditionmaychangewhenusingthemonitortogetherwiththeoptionalequipmentsrecommendedbySHARP.
Insuchcases,pleasecheckthetemperatureconditionspeciedbytheoptionalequipments.
Asapartofourpolicyofcontinuousimprovement,SHARPreservestherighttomakedesignandspecicationchangesforproductimprovement
withoutpriornotice.Theperformancespecicationguresindicatedarenominalvaluesofproductionunits.Theremaybesomedeviationsfrom
thesevaluesinindividualunits.
Specications
Mounting Precautions (For SHARP dealers and service engineers)
n
Attaching the Tray
1. Remove the cover from the back of the monitor.
2. Secure the tray mounting tting.
Secureusingthescrewremovedinstep1and2M5tray
mountingscrews(supplied).
M5 tray mounting screws
(supplied)
Tray mounting
fitting
(3)
(2)
(1)
Screw removed in step 1
Cover (supplied)
Bracket (supplied)
3. Secure the tray.
Insertthetrayintothetraymountingttingandsecurewith
2M4traymountingscrews(supplied).
Tray
(supplied)
M4 tray mounting screws
(supplied)