Instruction manual

49
E
Specications
n
Dimensional Drawings
Note that the values shown are approximate values.
55-5/8 [1413]
Opening width (52-11/16 [1339])
45-3/8 [1153]
Opening height (29-13/16 [757.5])
32-11/16 [831]
7-7/8 [200]
5-3/16
[131]
2-13/16
[71.5]
7-7/8
[200]
7-7/8
[200]
VESA holes *
3-15/16
[100]
3-15/16
[100]
Unit: inch [mm]
13/16 [20]
4-1/8
[104]
 Whenmountingthemonitor,besuretouseawall-mountbracketthatcomplieswiththeVESA-compatiblemountingmethod.
SHARPrecommendsusingM6screwsandtightenthescrews.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in
seriouspersonalinjuriesaswellasdamagetotheproduct.Thescrewandholeshouldcometogetherwithover5/16inch
(8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times
or more the weight of the monitor.
n
Power management
ThismonitorconformstoVESADPMSandDVIDMPM.Bothyourvideocardandcomputermustsupportthesamestandardin
order for the monitor’s power management function to work.
DPMS:DisplayPowerManagementSignaling
DPMS Screen
Power
consumption
Hsync Vsync
ONSTATE Display 240W*
1
Yes Yes
STANDBY
No
display
2.0W*
1
*
2
No Yes
SUSPEND Yes No
OFFSTATE No No
*1 WhenPN-ZB01(optional)isnotconnected.
*2 WhenAUTOINPUTCHANGEissettoOFF.
DMPM:DigitalMonitorPowerManagement
DMPM Screen
Power
consumption
Monitor ON Display 240W*
1
ActiveOFF No display 2.0W*
1
*
2
n
DDC (plug and play)
ThemonitorsupportstheVESADDC(DisplayDataChannel)standard.
DDCisasignalstandardforplugandplaybetweenmonitorsandcomputers.Informationaboutresolutionandotherparameters
isexchangedbetweenthetwo.ThisfunctioncanbeusedifthecomputersupportsDDCandithasbeenconguredtodetect
plug-and-playmonitors.
ThereareseveraltypesofDDC,dependingonthecommunicationmethodused.ThismonitorsupportsDDC2B.