User Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Removing the Handles
- Binding Cables
- Setting the USB flash drive cover
- Preparing the Remote Control Unit
- Turning Power On/Off
- Basic Operation
- Playing files
- Menu Items
- Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Controlling the Monitor with a PC (LAN)
- Troubleshooting
- Specifications
- Intellectual Property Rights and Other Matters that Apply to This Software
- Mounting Precautions (For SHARP dealers and service engineers)
39
E
Specications
n
Product Specications
Model PN-H801
LCD component
80" Class [80-1/2 inch (204.4cm) diagonal] TFT LCD
Max. resolution (pixels)
3840 x 2160
Max. colors
Approx. 1.06 billion colors
Pixel pitch
0.464 mm (H) × 0.464 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm)
70-1/8 x 39-7/16 (1781.76 x 1002.24)
Computer input signal
HDMI, Analog RGB (0.7 Vp-p) [75 Ω]
Sync signal
Horizontal/vertical separate (TTL: positive/negative)
Plug and play
VESA DDC2B
Input terminals
Video HDMI x 4
-
HDCP1.4 compatible (HDMI1 - HDMI3)
HDCP2.2 compatible (HDMI4)
-
ARC compatible (HDMI1)
-
MHL compatible (HDMI4)
Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
3.5 mm mini stereo jack x 1
USB ash drive x 1
Output terminals Audio
Digital audio output (optical) x 1
3.5 mm mini stereo jack x 1
LAN terminal 10 BASE-T/100 BASE-TX
Speaker output 10 W + 10 W
Internal memory 400 MB
Power requirement AC 100 - 240 V, 5.6 A, 50/60 Hz
Operating temperature
*
1
32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption (Maximum / standby mode
*
2
) 490 W/0.5 W
Dimensions (excluding protrusions) inch (mm)
Approx. 71-1/2 (W) x 4-1/2 (D) x 41-1/8 (H) (1816 x 114 x 1045)
Weight lbs. (kg)
Approx. 119.0 (54)
*1 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases,
please check the temperature condition specied by the optional equipments.
*2 When POWER SAVE MODE is set to ON. When POWER SAVE MODE is set to OFF: 27 W.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.