User Manual

17
E
Caution
• TurnonthemonitorrstbeforeturningonthePCor
playbackdevice.
Turning on the main power
Main power switch
Caution
• Themainpowermustbeturnedon/offwiththemainpower
switch.Donotconnect/disconnectthepowercordorturn
thebreakeron/offwhilethemainpowerswitchison.
• Whenturningthepoweroffandbackon,alwayswaitforat
least5seconds.
• Foracompleteelectricaldisconnection,pulloutthemain
plug.
Turning power on/off
PressthePOWERbuttonorPOWERswitchtoturnthepower
ON/OFF.
Power switch Power LED
Status Status of the monitor
Greenlit Poweron
Orangelit Poweroff(Standbymode)
Turning Power On/Off
ItispossibletocheckthepowerLEDevenwhentheoperation
panelisstoredinsidethemonitor.
Power LED
Caution
• Whenturningthepoweroffandbackon,alwayswaitforat
least5seconds.Ashortintervalmayresultinamalfunction.
TIPS
• Whenthemainpowerswitchisoff,themonitorcannotbe
turnedon.
n
Operation mode
Whenthemonitoristurnedonforthersttimeafterbeing
shippedfromthefactory,theoperationmodesettingscreen
willbedisplayed.SetittoMODE1orMODE2.
MODE1....OFFIFNOOPERATIONissettoON,andPOWER
SAVEMODEissettoON.(Thesesettingscannot
bechanged.)
Ifthereisnooperationfor4hoursormore,the
monitorautomaticallyentersstandbymode.Power
consumptioninstandbymodeisalsominimized.
MODE2....Willperformstandardoperation.
OFFIFNOOPERATIONissettoOFF,and
POWERSAVEMODEissettoON.Thesesettings
canbechanged.
Evenafterbeingset,changescanbemadeusing
OPERATIONMODE,locatedinthemenuofthemonitor.(See
page28.)
Disabling power on/off operations
Poweron/poweroffoperationscanbedisabledinorderto
protectthemonitorfromanaccidentalpoweroff.Setthe
POWERBUTTONLOCKinFUNCTIONmenu.(Seepage30.)