User Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Removing the Handles
- Binding Cables
- Setting the USB flash drive cover
- Preparing the Remote Control Unit
- Turning Power On/Off
- Basic Operation
- Playing files
- Menu Items
- Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Controlling the Monitor with a PC (LAN)
- Troubleshooting
- Specifications
- Intellectual Property Rights and Other Matters that Apply to This Software
- Mounting Precautions (For SHARP dealers and service engineers)
15
E
Binding Cables
Thecablesconnectedtotheterminalsontherearofthemonitorcanbefastenedwiththecableclamp.
*1
Cable clamp
Cable
Cable clamp
attachment
*1
*1
*1
*1
*1
*2
*3
*1
*1
*1
Cable clamp
(for power cord)
*3
Cable clamp
attachment
Cable
Cable clamp
(insertion type)
Cable
*2
Cable clamp
attachment
Setting the USB ash drive cover
1. Insert the USB ash drive into the USB port.
USB port
2. Remove the screw from the monitor, attach the USB
ash drive cover, and fasten with the screw that you
removed.
Screw
Caution
• Donottightenthescrewexcessively.Excessivetighteningmaydamagethemonitor.
TIPS
• IftheUSBashdrivecoverwillbeattached,useaUSBashdrivewithdimensionsnogreaterthan1-15/16inch(50mm)(L)
×13/16inch(20mm)(W)×1/2inch(12mm)(H).