How-To Guide

27
E
Menu Items
System LAN1 Network On/Off
USB-C Video Stream SST (Single Stream Transport) / MST (Multi
Stream Transport)
Images may not be displayed properly
depending on the computer (video card) to
be connected.
Sensor Hub Enable Sensors On/Off
Device Information OS/OS version
Model
Hardware ID/Serial number
Software License
Open Source Library
Admin Device Wireless LAN Name
Choose A New Wallpaper Choose
Install New Apps Choose
Country Select
Province / Region / State Select
City Select
Operation Mode Mode1
Power Saving Timeout: 5 mins (Standby
mode)
In-Device Motion Sensor: On
Wake On LAN: On
IoT Sensor Hub Always On: Off
Mode2
Power Saving Timeout: 5 mins (Backlight
off)
In-Device Motion Sensor: On
Wake On LAN: On
IoT Sensor Hub Always On: On
Change User Passcode Change
Change Admin Passcode Change
OTA Firmware Updates Update
USB Firmware Updates Update
Firmware Update Window Start Time
End Time
All Reset Reset
In-Device Motion Sensor
*
On/Off
Smart Switcher On/Off
Wake On LAN
*
On/Off
IoT Sensor Hub Always On
*
On/Off
LAN1 Always-on Connection On/Off
*: When “Operation Mode” is set to “Mode1”, these settings can not be changed.
About “LAN1 Network” and “LAN1 Always-on Connection”
• “LAN1Network”setto“On”tousetheLAN1terminal.
• DisconnecttheUSBTypeCcableorUSBAtoBcable,“LAN1Network”willbesetto“Off”automatically.
If “LAN1 Always-on Connection” is set to “On”, “LAN1 Network” will not be set to “Off” even if the cable is disconnected.