User Manual

35
E
Specications
n
Product Specications
Model
PN-C805B
PN-C705B
LCD component
80" Class [80 inch (203.2cm)
diagonal] TFT LCD
70" Class [69-1/2 inch (176.6cm)
diagonal] TFT LCD
Max. resolution (pixels)
1920 x 1080
Max. colors
Approx. 1.07 billion colors
*
1
Pixel pitch
0.923 mm (H) × 0.923 mm (V) 0.802 mm (H) × 0.802 mm (V)
Max. brightness (typical)
*
2
350 cd/m
2
Contrast ratio (typical) 5,000 : 1 4,000 : 1
Viewing angle *
3
Right/left 176° / Up/down 176°
(contrast ratio ≥ 10)
Right/left 176° / Up/down 176°
(contrast ratio ≥ 10)
Screen active area inch (mm)
69-3/4 (W) x 39-1/4 (H)
(1771.2 x 996.3)
60-9/16 (W) x 34-1/16 (H)
(1538.9 x 865.6)
Computer input signal
Analog RGB (0.7 Vp-p) [75
Ω
],
HDMI
Sync signal
Horizontal/vertical separate (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Input terminals
PC/AV HDMI x 3
PC Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
AV Composite video RCA
*
4
x 1
Component
RCA
(Y, Cb/Pb, Cr/Pr) *
4
x 1
Audio
RCA pin (L/R) x 1
Serial (RS-232C) D-sub 9 pin x 1
Output terminals Audio
3.5 mm mini stereo jack x 1
Speaker output (internal/external) 10 W + 10 W/10 W + 10 W
6
Ω
Touch Panel
Detection method Infrared blocking detection method
PC connector USB (2.0 compliant) (type B) x 1
Power requirement AC 100 V - 240 V, 3.1 A, 50/60 Hz AC 100 V - 240 V, 2.2 A, 50/60 Hz
Operating temperature
*
5
41°F to 95°F (5°C to 35°C)
Operating humidity
*
5
20% to 80% (no condensation)
Power consumption (input signal waiting mode /
standby mode
*
6
*
7
)
270W (27W/0.5W) 200W (16W/0.5W)
Dimensions (excluding protrusions) inch (mm)
Approx. 74-1/8 (W) x 5 (D) x
44-13/16 (H) (1882 x 127 x 1139)
Approx. 64-3/8 (W) x 3-3/4 (D) x
39-5/16 (H) (1635 x 96 x 998)
Weight lbs. (kg)
Approx. 174.2 (79) Approx. 136.7 (62)
*1 Maximum colors of LCD panel. The number of colors that can be displayed simultaneously is 16.77 million arbitrary colors out of 1.07
billion colors.
*2 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness.
*3 Excluding the touch sensor part around the LCD panel.
*4 Composite video and component cannot be used simultaneously.
*5 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satised.
*6 When a single input terminal is connected.
*7 When POWER SAVE MODE is set to ON.
When POWER SAVE MODE is set to OFF: PN-C805B: 28W, PN-C705B: 17W.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.