User manual

Construction of the resistive Touch Screen:
How to Operate
Touching the touch screen has the same effect as clicking the left mouse
button. You only need to apply a little pressure with the fingertip. In this re-
sistive process not only fingertip contact is recognized. The screen does
react in any way if touched, for example, with a stylus. The recommended
material for a stylus is polyacetal. The stylus should have a minimum
spherical radius of 0.8 mm and contain no sharp edges or burrs that may
cause damage to the topsheet.
Please see page 10 for how to adjust the brightness and the loudness.Touch Screen
Cleaning Instructions
Always turn off the system before cleaning. The surface of your Touch
Screen should be cleaned with a water-based solvent or a non-abrasive
cleaner.Do not use solvents containing acetic acid or methylene chloride.
Use a soft, fine-meshed cloth to clean the surface. Dampen the cloth
slightly and then clean the screen.
Hard-coated poly-
ester topsheet
Adhesive
Glass substrate with spa-
cer dots
Touch Screen
GB - 22