User manual

Touching the touch glass has the same effect as clicking the left mouse
button. You only need to apply a little pressure with the fingertip. In this ca-
pacitive process only fingertip contact is recognized. The screen does not
react in any way if touched, for example, with a pencil or a glove.
Brightness and Loudness
To adjust the brightness first remove the cable cover on the back of the
screen (see p. 4). Set brightness with the thumb wheel left of the socket
for the cable.
Adjust the loudness e.g. with a screw driver at the opening above the
thumb wheel (see picture).
Cleaning Instructions
Always turn off the system before cleaning. The glass surface of your
Touch Screen should be cleaned with a mild, commercially available glass
cleaning product. All pH neutral materials (pH 6 to 8) are good for clea-
ning. Cleaners with pH values 9 to 10 are not recommended. Cleaning
with water and isopropyl alcohol is possible as well. Do not use solvents
containing acetic acid. Use a soft, fine-meshed cloth to clean the surface.
Dampen the cloth slightly and then clean the screen.
Brightness (- +)
Loudness (-
+)
Touch Screen
GB - 10