Service manual

Ver. 3/00 3-6 Sharp Electronics Corporation
fig. 10
•
The air filter should be cleaned every 100 hours of use. Clean
the filter more often when the projector is used in a dusty or
smoky location.
• Have your nearest Authorized Sharp Industrial LCD Products
Dealer or Service Center exchange the filter (PFILD0059CEZZ)
when it is no longer possible to clean it.
POWER indicator goes
off. Unplug the power
cord.
Press the tab in the direction
of the arrow and lift open the
filter cover.
Grasp the air filter between
your fingers and lift out the
filter cover.
Clean the dust off the air
filter and cover with a
vacuum cleaner extension
hose.
Place the filter underneath the
tabs on the filter frame.
Return the air filter to its
original position in the filter
cover opening.
Insert the tab on the end of
the cover into the filter cover
opening and press the filter
cover into position.