Datasheet

SHARP CORPORATION
ED-971 36 1 September 8, 1997
MODEL No.
PAGE
PC357NT B/12
4. Reliability
The reliability of products shall satisfy
Confidence level : 90%
items listed below.
LTPD : 10%/20%
Test Items Test Conditions Failure Judgement
*1 Criteria
Solderability *2 23O”C, 5 s
Soldering heat *3 26O”C, 10s v,>ux 1.2
Samples (i-i:
Defective(C
n=ll, C=O
n=ll, C=O
Variable frequency
vibration
100 to 2000 to lOOHz/4min
200m/s2
4 times/ X, Y, 2 direction
V
CE(sat) > u ’ ’ ‘2
Temperature 1 cycle -40°C to +125”C
cycling
(30min) (30mi.n)
20 cycles test
U: Upper
High temp. and high +85”C, 85%RH, 500h *5 specification
humidity storage limit
High temp. storage
Low temp. storage
Operation life
+125”C, lOOOh
-4O”C, 1 OOOh
1,=5OmA, Ptot= 170mW
Ta=25”C, 1 OOOh
L : Lower
specification
limii
* 1 Test method, conforms to JIS C 702 1.
*2 Solder shall adhere at the area of 95% or more of immersed portion of
lead, and pin hole or other holes shall not be concentrated on one portion.
*3 The lead pin depth dipped into solder shall be 0.2mm away from the
root of lead pins.
*4 Terminal bending direction is shown below.
*5 It is evaluated after washing by specified solvent in attach sheet- 1- 1, 2.
Weight : 1N
0.2mm or more
n=ll, C=O
n=ll, C=O
n=ll. C=O
n=22 ,C=O
n=22,C=O
n=22,C=O
n=22,C=O
n=22 ,C=O