Specifications

Peripherals 4-3
4
External Monitor
Connecting an External Monitor
Follow the instructions below to use an external monitor with the notebook.
1. Be sure that both the notebook and the external monitor are turned off.
2. Open the I/O port cover at the rear of the notebook and locate the 15-pin female
CRT connector.
3. Connect the appropriate end of the monitor cable to the CRT connector on your
notebook if necessary. Connect the other end of the monitor cable to your
monitor and tighten monitor cable connector retaining screws.
Figure 4-2. Connecting an External Monitor
4. Connect the monitor power cable to the monitor, and plug the monitor power
cable into a wall outlet.
5. Power on the monitor as well as any other peripheral devices you may have
connected to the notebook, and then turn on the notebook.