Installation manual

W100T Twin Alternating Series Softeners 7
Regeneration and Error Screens
Regen Screen
Displays the time remaining in the current cycle. Pressing REGEN advances to the next cycle.
Error Screen
Alternated flashing Err and error code every 3 seconds. Clear by dissconnecting the power
supply at the PC board and reconneting, or press NEXT and REGEN simutaneously for 3
seconds.
In Alternator Systems when a unit is waiting to initiate the first cycle step of regeneration, “REGEN
PndG” is displayed.
“REGEN PndG RINSE FILL” is displayed whenever a zero-capacity tank has transferred to an off-line
state and is currently waiting to initiate the second portion of a regeneration cycle. Viewed only when
Delayed Rinse and Fill is set to ON.
“STbY” is displayed in Alternator Systems when a valve is in Standby state.